Electrometers
The primary function of traditional electrometers is to measure an electrical potential (volts) or charge (coulombs). Nowadays, electrometers are also designed to perform current and resistance measurements.
SCL has been accredited to calibrate electrometers for the following test parameters:
Electric Charge: 0.1 nC to 2 £gC
DC Voltage: 0.1 mV to 1 kV
DC Current: 1 pA to 20 mA
DC Resistance: 1 MΩ to 10 TΩ
Calibration charges
For calibration charges, please contact Mr. Dennis Lee at (852) 2829 4832 or wklee@itc.gov.hk.
(Note:- p, n, £g, m, k, M and T are SI prefixes, representing:
p: pico- or 10-12
n: nano- or 10-9
£g: micro- or 10-6
m: milli- or 10-3
k: kilo- or 103
M: mega- or 106
T: tera- or 1012)
